| |
|
|
Transmission Cooler Accessories
|
 |
 |
- Four Plastic Tie Rods, Pads and Retainers
- Easy installation of Cooler Core to radiator
Part No. 13001
|
|
 |
- Four Metal Pates
- 8 Sheet Metal Screws
- Mounts Cooler Core to radiator frame
Part No. 13002
|
|
 |
 |
- Replacement 7000 Series Kit
- All necessary hardware to install Cooler
- Kit includes #'l 13001, 13002, 13003, 13004
Part No. 13006
|
|
 |
- Stainless Steel
- Fits 11/32", 3/8", or 1/2" Hose
- Four per pack
Part No. 13008
|
|
 |
 |
- Drain fluid without having to remove pan
- Easy installation with drilling one hole
- Plug will accept 1/8" MPT Temp Sender
Part No. 13010
|
|
 |
- Provides additional filtration of fluid
- Ports up for easy access
- Use Fram PH8A
- Kit includes 3/8" MPT Hose Barbs
Part No. 13005
|
|
 |
 |
- Shortens warm up time in cold weather
- 3/8" Hose Barbs
- Fully open at 180°F / Closed at 160F
Part No. 13011
|
|
 |
- Automatic Controller for Remote Cooler
- -6AN Ports
- Attaches Directly to Cooler Core
- Activates Fan at 180 Degrees
Part No. 13021
|
|
 |
 |
- Manufactured for DERALE by Goodyear
- OEM High Temp specifications
Part No. 13003, 4 Feet, 11/32" ID
Part No. 13007, 25 Feet, 11/32" ID
Part No. 13016, 5 Feet, 3/8" ID
Part No. 13017, 25 Feet, 3/8" ID
|
|
 |
- 11/32" Goodyear hose with braided cover for abrasion resistance
- Swedged -6 AN hose ends for a leak free conection.
Part No. 13012, 6 Feet
Part No. 13013, 12 Feet
|
|
 |
 |
- Fits most vehicle with 5/16" transmission lines. Includes male and female threads. Adapter comes with all trans cooler kits.
Part No. 13004
|
|
 |
- Fits most 1991 and later FWD cars, 1996 and later GM trucks with 3/8" transmission lines. Female hosebarb threads on to factory transmission line. Male hosebarb threads on to radiator.
Part No. 13018
|
|
 |
 |
- Fits most 1987 and later Ford Aerostar, Explorer, Expedition, F Series Trucks and Ranger with 5/8-18 inverted flare with recessed threads. Female hosebarb threads on to factory tranmission line. Male hosebarb threads on to radiator.
Part No. 13025
|
|
 |
- Fits most 1983 and later Ford/Lincoln/Mercury cars and trucks with deep thread style 1/2-20 inverted flare with recessed threads. Female hosebarb threads on to factory transmission line. Male hosebarb threads on to radiator.
Part No. 13024
|
|
 |
 |
- Fits most 1983 and later Ford/Lincoln/Mercury cars with duckbill style fitting. 1/4" MPT Female hosebarb threads on to factory fitting attached to transmission line. Male hosebarb threads on to radiator.
Part No. 13014
|
|
 |
- Fits 1995 and later Dodge truck and 1985 and later Jeeps with 3/8" rubber transmission lines. To install, the factory rubber hose must be cut. 3/8" hose splicer fittigs are inserted in cuty hose, connected to transmission cooler.
Part No. 13028
|
|
 |
 |
- Fits all 1999 and later Dodge trucks. 9/16-18 JIC Flare Fitting Female hosebarb threads on to factory transmission line. Male hosebarb threads on to radiator.
Part No. 13030
|
|
|
|
|